Updates

proxmox-gpu-passthrough/install.sh

@@ -0,0 +1,77 @@
+#!/bin/bash
+
+# Function to check if a command exists
+command_exists() {
+    type "$1" &> /dev/null ;
+}
+
+# Check if the script is run as root
+if [ "$(id -u)" != "0" ]; then
+   echo "This script must be run as root. Please use sudo." 1>&2
+   exit 1
+fi
+
+# Update and install necessary packages
+echo "Updating package list and installing necessary tools..."
+apt-get update && apt-get upgrade -y
+if command_exists lspci; then
+    echo "lspci is already installed."
+else
+    echo "Installing lspci..."
+    apt-get install pciutils -y
+fi
+if command_exists grep; then
+    echo "grep is already installed."
+else
+    echo "Installing grep..."
+    apt-get install grep -y
+fi
+
+# Identify the GPU device you want to passthrough
+echo "Listing all PCI devices to identify your GPU:"
+lspci
+read -p "Enter the PCI ID of your GPU (e.g., 00:01.0): " gpu_id
+
+# Verify GPU identification
+echo "Verifying GPU with lspci -k..."
+lspci -k | grep -i "$gpu_id"
+if [ $? -ne 0 ]; then
+    echo "GPU not found or incorrect ID entered." >&2
+    exit 1
+fi
+
+# Configure Proxmox for GPU passthrough
+echo "Configuring Proxmox to enable GPU passthrough..."
+# Edit the VM configuration file, e.g., /etc/pve/qemu-server/YOUR_VM_ID.conf
+read -p "Enter the ID of the VM you want to configure (e.g., 100 for vm100): " vm_id
+echo "Editing VM configuration file for GPU passthrough..."
+sed -i "/^[^#]*args=/ s/$/ --device $gpu_id/" /etc/pve/qemu-server/$vm_id.conf
+
+# Optionally, add the GPU to a specific PCI slot (useful if you have multiple GPUs)
+echo "Do you want to bind this GPU to a specific PCI slot in Proxmox? This might require creating a new VMDX file."
+read -p "Type 'yes' or 'no': " response
+if [[ "$response" == "yes" ]]; then
+    read -p "Enter the desired PCI slot (e.g., 00:02.0): " pci_slot
+    echo "Adding GPU to specified PCI slot..."
+    # You might need to create a new VMDX file or modify an existing one, this step depends on your Proxmox setup and version.
+fi
+
+# Blacklist the GPU driver modules
+echo "Do you want to blacklist the GPU driver modules? This will prevent them from loading at boot."
+read -p "Type 'yes' or 'no': " response
+if [[ "$response" == "yes" ]]; then
+    echo "Blacklisting GPU driver modules..."
+    # Create a blacklist file for the relevant drivers
+    echo "${gpu_id}*" > /etc/modprobe.d/blacklist-gpu.conf
+fi
+
+# Restart the VM for changes to take effect
+echo "Changes require restarting the VM. Please power off your VM:"
+read -p "Enter the ID of the VM you want to restart (e.g., 100): " vm_id
+virsh shutdown $vm_id
+read -p "Power on the VM now? Type 'yes': " response
+if [[ "$response" == "yes" ]]; then
+    virsh start $vm_id
+fi
+
+echo "GPU passthrough setup is complete. Please check your VM for GPU functionality."

proxmox-scripts/install.sh

@@ -17,6 +17,8 @@ function show_menu() {
 function install_pve_no_subscription_warning() {
     clear
     echo "Installing PVE-No-Subscription-Warning..."
+    # Backup important configuration files
+    backup_file "/etc/apt/sources.list"
     # Add your installation command here, for example:
     wget https://raw.githubusercontent.com/proxmox/pve-no-subscription-warning/master/pve-no-subscription-warning -O /usr/local/bin/pve-no-subscription-warning
     chmod +x /usr/local/bin/pve-no-subscription-warning
@@ -28,6 +30,8 @@ function install_pve_no_subscription_warning() {
 function install_pve_kernel_module_patcher() {
     clear
     echo "Installing PVE Kernel Module Patcher..."
+    # Backup important configuration files
+    backup_file "/etc/modprobe.d/proxmox-no-subscription.conf"
     # Add your installation command here, for example:
     wget https://raw.githubusercontent.com/olafm/proxmox-no-subscription-patch/master/pve-no-subscription-patch -O /usr/local/bin/pve-kernel-module-patcher
     chmod +x /usr/local/bin/pve-kernel-module-patcher
@@ -46,6 +50,19 @@ function install_pve_vm_backup_script() {
     read -n 1 -s -r -p "Press any key to continue..."
 }
 
+# Function to backup files
+function backup_file() {
+    local file=$1
+    if [ -f $file ]; then
+        local timestamp=$(date +%Y%m%d_%H%M%S)
+        local backup_file="/root/backup_$timestamp_$(basename $file)"
+        echo "Backing up $file to $backup_file"
+        rsync -a --delete $file $backup_file
+    else
+        echo "$file does not exist. Skipping backup."
+    fi
+}
+
 # Main loop
 while true; do
     show_menu

windows-11-fresh-install/ai-prompt.md

@@ -0,0 +1,49 @@
+Please write me a Windows 11 Powershell script that presents the user with a menu of the following options and executes the associated tasks. It should include echo statements to keep the user informed. Please also style the terminal interface to make it easy to use.
+
+The script should include the following options:
+
+1) Make the following modifications to Windows:
+   
+   1) Revert to the old explorer context menu.
+   
+   2) Enable hidden files by default.
+   
+   3) Enable showing file extensions by default.
+
+2) The option to download and install the following system utilities. Users should be able to select/deselect which apps they would like installed before executing the task:
+   
+   1) OpenRGB
+   
+   2) FanControl
+   
+   3) System Informer
+   
+   4) WizTree
+   
+   5) Rustdesk (remote desktop software)
+   
+   6) XnViewMP (image viewer)
+   
+   7) Browsers:
+      
+      1) Mozilla Firefox
+      
+      2) Waterfox
+      
+      3) Zen Browser
+      
+      4) Thorium
+      
+      5) Chromium
+      
+      6) Vivaldi
+   
+   8) UniGetUI (package manager)
+   
+   9) ShareX
+   
+   10) Windhawk
+
+3) Download an execute the MassGravel Windows Activation Script.
+
+4) Download and install Grafana, Prometheus, Windows Exporter and OHMGraphite. Make sure Prometheus is then configured to collect data from Windows Exporter and OHMGraphite.